Industrial Sectors

For Manufacturers & EPCC Contractors

Our services for Manufacturers and EPCC Contractors

  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process –ISO 3834
  • Welders’ certification according to ASME UNI EN ISO-AWS standards
  • Practical courses for Welders and Operators – Metallic Materials
  • Practical courses for welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification (WPS)
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance in Laboratory Testing, Welding and Coating
  • Consultancy and technical assistance

During the design step

  • Technological design verification
  • Structural analysis and design of pressure vessels
  • Structural assessment of lifting appliances
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Comparative evaluation of compliance with different fabrication codes
  • Conception and technological design of welding
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RAMS Assessment (Reliability, Availability, Maintainability, Safety)
  • RBI Assessments (Risk Based Inspection)
  • SRMCR (Safety Related Measurement Control and Regulation) – PSV (Pressure Safety Valve)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Suppliers technical capabilties assessment
  • Consultancy and technical assistance

During shop prefabrication

Pre-service Inspection

  • Workshop and site inspection during fabrication stage
  • Inspections at suppliers facilities
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non destructive testing
  • Piping inspection – Long Range Guided Wave inspection
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Conception and technological design of welding
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • Conception and technological design of welding
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

Other services

  • Simulated Heat Treatments
  • Welding Laboratory & Failure analysis
  • Tailored training courses
  • Education and training according to other IIW and EWF qualifications

Plant Users

Our services for Plant Users

Services for Your organization

  • RBI Assessments (Risk Based Inspection)
  • Services for Plant protection systems
  • Technical support for the interpretation of European Product Directive and Regulation
  • Management System Certification ISO 9001 – ISO 14001 – OHSAS 18001
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Courses for plant inspectors
  • Courses for API inspectors
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Consultancy and technical assistance
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Development of software routines and tailored information tools

During the design step

  • Repair / modification design of pressure equipment
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RBI Assessments (Risk Based Inspection)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Supplier’s technical capabilties assessment

During shop prefabrication

Pre-service Inspection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

During service lifetime

  • In-service inspection
  • Simulated Heat Treatments
  • Technical assistance for inspection intervals extension
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Our Inspectors

Producers

  • CE conformity assessment according to Directives (PED, TPED, ATEX, SPVD, LVD, EMC, Machinery, RoHS, CPR 305
  • Technical support for the interpretation of European Product Directive and Regulation (PED, TPED, ATEX, SPVD, LVD, EMC, Macchine, RoHS, CPR 305)
  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process – ISO 3834 and of FPC (Factory Production Control) Practical courses for Welders and Operators of metal materials welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Workshop and site inspection during fabrication stage
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non-destructive testing

For Manufacturers & EPCC Contractors

Our services for Manufacturers and EPCC Contractors

  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process –ISO 3834
  • Welders’ certification according to ASME UNI EN ISO-AWS standards
  • Practical courses for Welders and Operators – Metallic Materials
  • Practical courses for welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification (WPS)
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance in Laboratory Testing, Welding and Coating
  • Consultancy and technical assistance

During the design step

  • Technological design verification
  • Structural analysis and design of pressure vessels
  • Structural assessment of lifting appliances
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Comparative evaluation of compliance with different fabrication codes
  • Conception and technological design of welding
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RAMS Assessment (Reliability, Availability, Maintainability, Safety)
  • RBI Assessments (Risk Based Inspection)
  • SRMCR (Safety Related Measurement Control and Regulation) – PSV (Pressure Safety Valve)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Suppliers technical capabilties assessment
  • Consultancy and technical assistance

During shop prefabrication

Pre-service Inspection

  • Workshop and site inspection during fabrication stage
  • Inspections at suppliers facilities
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non destructive testing
  • Piping inspection – Long Range Guided Wave inspection
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Conception and technological design of welding
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • Conception and technological design of welding
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

Other services

  • Simulated Heat Treatments
  • Welding Laboratory & Failure analysis
  • Tailored training courses
  • Education and training according to other IIW and EWF qualifications

For Plant Users

Our services for Plant Users

Services for Your organization

  • RBI Assessments (Risk Based Inspection)
  • Services for Plant protection systems
  • Technical support for the interpretation of European Product Directive and Regulation
  • Management System Certification ISO 9001 – ISO 14001 – OHSAS 18001
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Courses for plant inspectors
  • Courses for API inspectors
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Consultancy and technical assistance
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Development of software routines and tailored information tools

During the design step

  • Repair / modification design of pressure equipment
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RBI Assessments (Risk Based Inspection)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Supplier’s technical capabilties assessment

During shop prefabrication

Pre-service Inspection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

During service lifetime

  • In-service inspection
  • Simulated Heat Treatments
  • Technical assistance for inspection intervals extension
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Our Inspectors

For Manufacturers & EPCC Contractors

Our services for Manufacturers and EPCC Contractors

  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process –ISO 3834
  • Welders’ certification according to ASME UNI EN ISO-AWS standards
  • Practical courses for Welders and Operators – Metallic Materials
  • Practical courses for welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification (WPS)
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance in Laboratory Testing, Welding and Coating
  • Consultancy and technical assistance

During the design step

  • Technological design verification
  • Structural analysis and design of pressure vessels
  • Structural assessment of lifting appliances
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Comparative evaluation of compliance with different fabrication codes
  • Conception and technological design of welding
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RAMS Assessment (Reliability, Availability, Maintainability, Safety)
  • RBI Assessments (Risk Based Inspection)
  • SRMCR (Safety Related Measurement Control and Regulation) – PSV (Pressure Safety Valve)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Suppliers technical capabilties assessment
  • Consultancy and technical assistance

During shop prefabrication

Pre-service Inspection

  • Workshop and site inspection during fabrication stage
  • Inspections at suppliers facilities
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non destructive testing
  • Piping inspection – Long Range Guided Wave inspection
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Conception and technological design of welding
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • Conception and technological design of welding
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

Other services

  • Simulated Heat Treatments
  • Welding Laboratory & Failure analysis
  • Tailored training courses
  • Education and training according to other IIW and EWF qualifications

For Plant Users

Our services for Plant Users

Services for Your organization

  • RBI Assessments (Risk Based Inspection)
  • Services for Plant protection systems
  • Technical support for the interpretation of European Product Directive and Regulation
  • Management System Certification ISO 9001 – ISO 14001 – OHSAS 18001
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Courses for plant inspectors
  • Courses for API inspectors
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Consultancy and technical assistance
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Development of software routines and tailored information tools

During the design step

  • Repair / modification design of pressure equipment
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RBI Assessments (Risk Based Inspection)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Supplier’s technical capabilties assessment

During shop prefabrication

Pre-service Inspection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

During service lifetime

  • In-service inspection
  • Simulated Heat Treatments
  • Technical assistance for inspection intervals extension
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Our Inspectors

For Producers

  • CE conformity assessment according to Directives (PED, TPED, ATEX, SPVD, LVD, EMC, Machinery, RoHS, CPR 305
  • Technical support for the interpretation of European Product Directive and Regulation (PED, TPED, ATEX, SPVD, LVD, EMC, Macchine, RoHS, CPR 305)
  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process – ISO 3834 and of FPC (Factory Production Control) Practical courses for Welders and Operators of metal materials welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Workshop and site inspection during fabrication stage
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non-destructive testing

For Manufacturers & EPCC Contractors

Our services for Manufacturers and EPCC Contractors

  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process –ISO 3834
  • Welders’ certification according to ASME UNI EN ISO-AWS standards
  • Practical courses for Welders and Operators – Metallic Materials
  • Practical courses for welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification (WPS)
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance in Laboratory Testing, Welding and Coating
  • Consultancy and technical assistance

During the design step

  • Technological design verification
  • Structural analysis and design of pressure vessels
  • Structural assessment of lifting appliances
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Comparative evaluation of compliance with different fabrication codes
  • Conception and technological design of welding
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RAMS Assessment (Reliability, Availability, Maintainability, Safety)
  • RBI Assessments (Risk Based Inspection)
  • SRMCR (Safety Related Measurement Control and Regulation) – PSV (Pressure Safety Valve)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Suppliers technical capabilties assessment
  • Consultancy and technical assistance

During shop prefabrication

Pre-service Inspection

  • Workshop and site inspection during fabrication stage
  • Inspections at suppliers facilities
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non destructive testing
  • Piping inspection – Long Range Guided Wave inspection
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Conception and technological design of welding
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • Conception and technological design of welding
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

Other services

  • Simulated Heat Treatments
  • Welding Laboratory & Failure analysis
  • Tailored training courses
  • Education and training according to other IIW and EWF qualifications

For Pipeline Network Manufacturers

Our services for Manufacturers and EPCC Contractors

  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process –ISO 3834
  • Welders’ certification according to ASME UNI EN ISO-AWS standards
  • Practical courses for Welders and Operators – Metallic Materials
  • Practical courses for welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification (WPS)
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance in Laboratory Testing, Welding and Coating
  • Consultancy and technical assistance

During the design step

  • Technological design verification
  • Structural analysis and design of pressure vessels
  • Structural assessment of lifting appliances
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Comparative evaluation of compliance with different fabrication codes
  • Conception and technological design of welding
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RAMS Assessment (Reliability, Availability, Maintainability, Safety)
  • RBI Assessments (Risk Based Inspection)
  • SRMCR (Safety Related Measurement Control and Regulation) – PSV (Pressure Safety Valve)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Suppliers technical capabilties assessment
  • Consultancy and technical assistance

During shop prefabrication

Pre-service Inspection

  • Workshop and site inspection during fabrication stage
  • Inspections at suppliers facilities
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non destructive testing
  • Piping inspection – Long Range Guided Wave inspection
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Conception and technological design of welding
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • Conception and technological design of welding
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

Other services

  • Simulated Heat Treatments
  • Welding Laboratory & Failure analysis
  • Tailored training courses
  • Education and training according to other IIW and EWF qualifications

For Managing Companies

Our services for managing companies

Services for Your organization

  • RBI Assessments (Risk Based Inspection)
  • Services for Plant protection systems
  • Technical support for the interpretation of European Product Directive and Regulation
  • Management System Certification ISO 9001 – ISO 14001 – OHSAS 18001
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Courses for plant inspectors
  • Courses for API inspectors
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Consultancy and technical assistance
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Development of software routines and tailored information tools

During the design step

  • Repair / modification design of pressure equipment
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RBI Assessments (Risk Based Inspection)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Supplier’s technical capabilties assessment

During shop prefabrication

Pre-service Inspection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

During service lifetime

  • In-service inspection
  • Simulated Heat Treatments
  • Technical assistance for inspection intervals extension
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Our Inspectors

For Producers

  • CE conformity assessment according to Directives (PED, TPED, ATEX, SPVD, LVD, EMC, Machinery, RoHS, CPR 305
  • Technical support for the interpretation of European Product Directive and Regulation (PED, TPED, ATEX, SPVD, LVD, EMC, Macchine, RoHS, CPR 305)
  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process – ISO 3834 and of FPC (Factory Production Control) Practical courses for Welders and Operators of metal materials welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Workshop and site inspection during fabrication stage
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non-destructive testing

For Manufacturers engineering & Construction Companies

Our services for Manufacturers and EPCC Contractors

  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process –ISO 3834
  • Welders’ certification according to ASME UNI EN ISO-AWS standards
  • Practical courses for Welders and Operators – Metallic Materials
  • Practical courses for welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification (WPS)
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance in Laboratory Testing, Welding and Coating
  • Consultancy and technical assistance

During the design step

  • Technological design verification
  • Structural analysis and design of pressure vessels
  • Structural assessment of lifting appliances
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Comparative evaluation of compliance with different fabrication codes
  • Conception and technological design of welding
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RAMS Assessment (Reliability, Availability, Maintainability, Safety)
  • RBI Assessments (Risk Based Inspection)
  • SRMCR (Safety Related Measurement Control and Regulation) – PSV (Pressure Safety Valve)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Suppliers technical capabilties assessment
  • Consultancy and technical assistance

During shop prefabrication

Pre-service Inspection

  • Workshop and site inspection during fabrication stage
  • Inspections at suppliers facilities
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non destructive testing
  • Piping inspection – Long Range Guided Wave inspection
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Conception and technological design of welding
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • Conception and technological design of welding
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

Other services

  • Simulated Heat Treatments
  • Welding Laboratory & Failure analysis
  • Tailored training courses
  • Education and training according to other IIW and EWF qualifications

For Managing Companies

Our services for Plant Users

Services for Your organization

  • RBI Assessments (Risk Based Inspection)
  • Services for Plant protection systems
  • Technical support for the interpretation of European Product Directive and Regulation
  • Management System Certification ISO 9001 – ISO 14001 – OHSAS 18001
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Courses for plant inspectors
  • Courses for API inspectors
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Consultancy and technical assistance
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Development of software routines and tailored information tools

During the design step

  • Repair / modification design of pressure equipment
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RBI Assessments (Risk Based Inspection)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Supplier’s technical capabilties assessment

During shop prefabrication

Pre-service Inspection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

During service lifetime

  • In-service inspection
  • Simulated Heat Treatments
  • Technical assistance for inspection intervals extension
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Our Inspectors

For Manufacturers & Construction Companies

Our services for Manufacturers and EPCC Contractors

  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process –ISO 3834
  • Welders’ certification according to ASME UNI EN ISO-AWS standards
  • Practical courses for Welders and Operators – Metallic Materials
  • Practical courses for welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification (WPS)
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance in Laboratory Testing, Welding and Coating
  • Consultancy and technical assistance

During the design step

  • Technological design verification
  • Structural analysis and design of pressure vessels
  • Structural assessment of lifting appliances
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Comparative evaluation of compliance with different fabrication codes
  • Conception and technological design of welding
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RAMS Assessment (Reliability, Availability, Maintainability, Safety)
  • RBI Assessments (Risk Based Inspection)
  • SRMCR (Safety Related Measurement Control and Regulation) – PSV (Pressure Safety Valve)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Suppliers technical capabilties assessment
  • Consultancy and technical assistance

During shop prefabrication

Pre-service Inspection

  • Workshop and site inspection during fabrication stage
  • Inspections at suppliers facilities
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non destructive testing
  • Piping inspection – Long Range Guided Wave inspection
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Conception and technological design of welding
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • Conception and technological design of welding
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

Other services

  • Simulated Heat Treatments
  • Welding Laboratory & Failure analysis
  • Tailored training courses
  • Education and training according to other IIW and EWF qualifications

For Managing Companies

Our services for Plant Users

Services for Your organization

  • RBI Assessments (Risk Based Inspection)
  • Services for Plant protection systems
  • Technical support for the interpretation of European Product Directive and Regulation
  • Management System Certification ISO 9001 – ISO 14001 – OHSAS 18001
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Courses for plant inspectors
  • Courses for API inspectors
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Consultancy and technical assistance
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Development of software routines and tailored information tools

During the design step

  • Repair / modification design of pressure equipment
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RBI Assessments (Risk Based Inspection)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Supplier’s technical capabilties assessment

During shop prefabrication

Pre-service Inspection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

During service lifetime

  • In-service inspection
  • Simulated Heat Treatments
  • Technical assistance for inspection intervals extension
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Our Inspectors

For Producers

  • CE conformity assessment according to Directives (PED, TPED, ATEX, SPVD, LVD, EMC, Machinery, RoHS, CPR 305
  • Technical support for the interpretation of European Product Directive and Regulation (PED, TPED, ATEX, SPVD, LVD, EMC, Macchine, RoHS, CPR 305)
  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process – ISO 3834 and of FPC (Factory Production Control) Practical courses for Welders and Operators of metal materials welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance
  • Our services for Welding Laboratory testing and Failure analysis
  • Our services for Coating Laboratory testing and Failure analysis
  • Workshop and site inspection during fabrication stage
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non-destructive testing

For Iron and Steel

Our services for Manufacturers and EPCC Contractors

  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process –ISO 3834
  • Welders’ certification according to ASME UNI EN ISO-AWS standards
  • Practical courses for Welders and Operators – Metallic Materials
  • Practical courses for welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification (WPS)
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance in Laboratory Testing, Welding and Coating
  • Consultancy and technical assistance

During the design step

  • Technological design verification
  • Structural analysis and design of pressure vessels
  • Structural assessment of lifting appliances
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Comparative evaluation of compliance with different fabrication codes
  • Conception and technological design of welding
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RAMS Assessment (Reliability, Availability, Maintainability, Safety)
  • RBI Assessments (Risk Based Inspection)
  • SRMCR (Safety Related Measurement Control and Regulation) – PSV (Pressure Safety Valve)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Suppliers technical capabilties assessment
  • Consultancy and technical assistance

During shop prefabrication

Pre-service Inspection

  • Workshop and site inspection during fabrication stage
  • Inspections at suppliers facilities
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non destructive testing
  • Piping inspection – Long Range Guided Wave inspection
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Conception and technological design of welding
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • Conception and technological design of welding
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

Other services

  • Simulated Heat Treatments
  • Welding Laboratory & Failure analysis
  • Tailored training courses
  • Education and training according to other IIW and EWF qualifications

For Manufacturers

Our services for Manufacturers and EPCC Contractors

  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process –ISO 3834
  • Welders’ certification according to ASME UNI EN ISO-AWS standards
  • Practical courses for Welders and Operators – Metallic Materials
  • Practical courses for welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification (WPS)
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance in Laboratory Testing, Welding and Coating
  • Consultancy and technical assistance

During the design step

  • Technological design verification
  • Structural analysis and design of pressure vessels
  • Structural assessment of lifting appliances
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Comparative evaluation of compliance with different fabrication codes
  • Conception and technological design of welding
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RAMS Assessment (Reliability, Availability, Maintainability, Safety)
  • RBI Assessments (Risk Based Inspection)
  • SRMCR (Safety Related Measurement Control and Regulation) – PSV (Pressure Safety Valve)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Suppliers technical capabilties assessment
  • Consultancy and technical assistance

During shop prefabrication

Pre-service Inspection

  • Workshop and site inspection during fabrication stage
  • Inspections at suppliers facilities
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non destructive testing
  • Piping inspection – Long Range Guided Wave inspection
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Conception and technological design of welding
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • Conception and technological design of welding
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

Other services

  • Simulated Heat Treatments
  • Welding Laboratory & Failure analysis
  • Tailored training courses
  • Education and training according to other IIW and EWF qualifications

For Manufacturers

Our services for Manufacturers and EPCC Contractors

  • Management Systems Certifications according to ISO 9001 – ISO 14001 – OHSAS 18001
  • Certification of the welding fabrication process –ISO 3834
  • Welders’ certification according to ASME UNI EN ISO-AWS standards
  • Practical courses for Welders and Operators – Metallic Materials
  • Practical courses for welding
  • Welding education and training (Welding Inspectors and Coordinators and for NDT personnel
  • Welding Procedure Specification (WPS)
  • Welders and Welding Operators for metallic materials
  • Certification of welding coordinators and welding inspectors and NDT Personnel
  • Courses on Quality Management, Health, Safety and Environment in welding
  • Consultancy and technical assistance in Laboratory Testing, Welding and Coating
  • Consultancy and technical assistance

During the design step

  • Technological design verification
  • Structural analysis and design of pressure vessels
  • Structural assessment of lifting appliances
  • Assessment of fatigue life for civil structures, lifting appliances and mechanical components
  • Structural analysis of atmospheric storage tanks
  • Comparative evaluation of compliance with different fabrication codes
  • Conception and technological design of welding
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Material and corrosion engineering – Material Selection
  • RAMS Assessment (Reliability, Availability, Maintainability, Safety)
  • RBI Assessments (Risk Based Inspection)
  • SRMCR (Safety Related Measurement Control and Regulation) – PSV (Pressure Safety Valve)
  • Piping Design Specifications
  • Development of software routines and tailored information tools
  • Consultancy and technical assistance
  • Evaluation of the damage mechanisms affecting pressure equipment and piping

Along with the procurement

  • Drafting and revision of technical specifications for procurement, fabrication and repair
  • Suppliers technical capabilties assessment
  • Consultancy and technical assistance

During shop prefabrication

Pre-service Inspection

  • Workshop and site inspection during fabrication stage
  • Inspections at suppliers facilities
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Automated non destructive testing
  • Piping inspection – Long Range Guided Wave inspection
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Conception and technological design of welding
  • Consultancy and technical assistance
  • Our Inspectors

During site erection

  • Worshop and site inspection during fabrication stage
  • Welding Inspection
  • Conception and technological design of welding
  • Welding Inspection
  • NDT – Surface, Volumetric Non Destructive Testing
  • Piping inspection – Long Range Guided Wave inspection
  • Automated non destructive testing
  • Heat exchangers tubes inspection
  • Repair / modification design of pressure equipment
  • Repair / modification design of civil structures, lifting appliances and mechanical components
  • Stress analysis of piping equipment
  • Fitness For Service (FFS) & Engineering Critical Assessment (ECA)
  • Consultancy and technical assistance
  • Our Inspectors

Other services

  • Simulated Heat Treatments
  • Welding Laboratory & Failure analysis
  • Tailored training courses
  • Education and training according to other IIW and EWF qualifications